• Interface
  • ML-7710: IEEE 802.3 series 10/100Base-T
  • ML-7711: 100Base-FX
• Connector type
  • ML-7710: 10/100Base-T, RJ-45
  • ML-7711: 100Base-FX, MTRJ, 1300nm, multi-mode fiber
• Line Rate
  • 10 Mbps or 100 Mbps, user-controlled or autonegotiate
• Port Density
  • 1 port per ML-7710/ML-7711 SmartCard
  • 4 ports maximum per SMB-200 chassis
  • 20 ports maximum per SMB-2000 chassis
  • 640 ports may be controlled from one workstation via 32 chassis
• General for frame or stream based transmit
  • Full line-rate (10/100 Mbps) transmit
  • Full/half duplex operation
  • Auto-negotiate or manually select rate/duplex
  • Frame Length : 24–1,600 bytes, random
  • Interpacket gap: at 100 Mbps = min 960 nsec, max 1.6 sec, 40 nsec increments or random; at 10 Mbps = min. 9.6 usec, max 16 sec, 400 nsec increments or random
  • Background frame data fill pattern: user-selectable or random data
  • Selections: incrementing/decrementing bytes, all zeros, all ones, or user-selectable for the first 64 bytes
  • Errors: CRC, dribble bit, alignment, symbol, oversize, undersize
  • Protocol assist: ARP, DHCP, ICMP, IGMP, IP, IPX, RARP, RIP, TCP, UDP, VLAN, 802.1p, 802.1q, pause control frame, and custom
• Modes
  • Continuous: constant frame transmit
  • Single burst: up to 16 million frames in a single burst
  • Multi-burst: up to 65,536 bursts with a user-defined delay (max 1.6 sec) between bursts
  • Continuous Multi-burst: runs multi-burst mode continuously

NOTE:  No software of any kind (external or internal) is provided with the Hardware. Please contact Spirent to obtain software license rights and maintenance support